400W Folding Solar Blacket For RV
1. For RV travel, a 400W portable solar blanket can charge the RV’s battery, replenishing the power consumed by RV electrical devices (such as interior lighting, TV, small air conditioner, etc.) and extending travel time without external power supply;
2. For outdoor camping scenarios, it can charge power devices such as 12V/24V/48V batteries, provide power to camping lights, mobile phones, and tablets. Some of these devices, when connected to appropriate power management equipment (such as inverters), can also provide power for devices like mini-fridges, facilitating convenient camping life with sustained power support;
400W Folding Solar Blacket For RV Advantages:
1. For RV travel, a 400W portable solar blanket can charge the RV’s battery, replenishing the power consumed by RV electrical devices (such as interior lighting, TV, small air conditioner, etc.) and extending travel time without external power supply;
2. For outdoor camping scenarios, it can charge power devices such as 12V/24V/48V batteries, provide power to camping lights, mobile phones, and tablets. Some of these devices, when connected to appropriate power management equipment (such as inverters), can also provide power for devices like mini-fridges, facilitating convenient camping life with sustained power support;
3. It is with handle, 4pcs solar panel 100W each to connect, folding design, save space, easy to take;
4. on front of solar panel use ETFE laminated, good quality with high efficiency power generate.
Handle color is optional:
400W Folding Solar Blacket For RV datasheet:
| Model | NE-PS400W |
| Peak power Pm(W) | 400W |
| Open circuit voltage Voc(V) | 48.0V |
| Max. power voltage Vmp(V) | 40.0V |
| Max. power current Imp(A) | 10.0A |
| Short circuit current Isc(A) | 10.5A |
| Solar cells Efficiency | 23-25% |
| Solar panel model&number | 100W/40V*4pcs
4pcs by parallel |
| Folded size | 1074*631*45mm |
| Unfolded size | 2370*1074*25mm |
| N.G | 16.6kg |
| solar cell | High Efficiency PERC Semi Flexible Mono solar cell |
| Solar panel Front cover(material) | ■ETFE
(optional)Add enhanced composition material. |
| Solar panel backboard(material) | ■Epoxy Board（Default）
(optional) FR-4 Fiberglass Board |
| Output port | ■conjunction box+30CM cable
(could be customized） |
| Operating temperature limits | -40℃- +85℃ |
| Storage temperature limits | -10℃- +30℃ |
| Waterproof grade | IP65 |
| Lifetime | More than 10 years |
| STC | 1000W/m2, Temp:25℃,AM:1.5 |
| Package size/Weight | One piece：1130*90*695mm
G.W：18.5KG/box Package：1155*195*730 mm（2pcs/Carton）G.W：39KGs/Carton |
Remark: portable solar charger is customized for dimension/voltage/current.
Junction box is optional:
Precautions for the use of Solar Blanket:
1: Solar blanket should be placed in direct sunlight, and adjust the appropriate Angle to receive light to achieve maximum power generation effect.
2: This product is suitable for mobile energy storage power supply equipment with rated voltage DC 24-28V (with built-in solar charging protection function) or battery charging, but the output electrode of the solar panel cannot be used to directly charge the battery, and a solar charging controller must be installed.
3: If the rain shower does not affect the normal use (note that it cannot be contacted by conductive/corrosive liquid such as seawater, which will lead to short circuit inside the junction box resulting in abnormal power generation, if there is contact, rinse it with clean water and dry it)
4: When connecting the solar controller/energy storage integration, pay attention to the positive and negative terminals of the interface should be correctly connected.
5: Before connecting the solar controller/battery/energy storage device, check the product specifications/power/current/voltage requirements in detail and do not exceed the limits to prevent damage to the device and avoid uncontrollable consequences.
6: The voltage of the equipment in the light has exceeded the safety voltage of the human body, should avoid direct contact or short circuit equipment electrodes, to avoid electric shock or cause safety hazards! If the solar panel is damaged, it should be stopped to prevent leakage damage!
7: The use should be handled lightly, strictly prohibited from beating, heavy pressure, impact, otherwise it may seriously damage the solar cell.
